應用 Applications

機制螺桿擠壓顆粒、搖擺顆粒、濕法高速混合制粒顆粒。

醫藥、食品、飼料、化工等領域濕顆粒和粉狀物料干燥。

大顆粒，小塊狀，粘性塊粒狀物料。

魔芋等干燥時體積變化的物料。

Machine-made screw extrudes particles, sways particles and wet high-speed mixinggranulation particles.ODrying of wet granules and powdery materials in the fields of medicine, food, feed.chemical industry, etc.

Granular materials with large particles, small blocks and sticky blocks.

Amorphophallus konjac and other materials with volume change during drying.

特 點 Features

流化床為圓形結構，避免死角。

料斗設置攪拌，避免潮濕物料團聚及干燥時形成溝流。

采用翻傾卸料，方便迅速，亦可按要求設計自動進出料系統。密閉負壓操作，氣體經過過濾。操作簡便，清洗方便，是符合“GMP”要求的理想設備。

干燥速度快，溫度均勻，每批干燥時間一般在20-30分鐘。

Fluidized bed is of circular structure to avoid dead corners.The hopper is equipped with stirring to avoid agglomeration of wet materials andformation of channel flow during drying.Otipping unloading is adopted, which is convenient, rapid and thorough. automaticfeeding and discharging system can also be designed as required.OClosed negative pressure operation, the gas is filtered. lt is simple to operate andeasy to clean. It is an ideal equipment meeting the requirements of GMP.ODrying speed is fast and temperature is uniform. Drying time for each batch isgenerally 20-30 minutes.

原 理 Principles

空氣經加熱凈化后，由引風機從下部導入，穿過料斗的孔網板。在工作室內，經攪拌和負壓作用形成流態化，水份快速蒸發后隨著排氣帶走，物料快速干燥。

After being heated and purified, the air is introduced from the lowerpart by an induced draft fan and passes through the hole mesh plateof the hopper. In the working chamber, fluidization is formed bystirring and negative pressure, water is quickly evaporated and thentaken away with exhaust gas, and the materials are quickly dried.

安裝示意圖 Schematic of installation

技術參數 Technical parameters